Yesterday my alarm started going off randomly. If i left the car unlocked it locked automatically and the alarm would go off again after a minute. I went into to the measuring and it showed the last 4 things that set off the alarm as being 64 but i dont know what that is. Here is the auto scan. Saturday,19,February,2011,08:7 VCDS Version: Release 10.6.1 (x64). Apr 01, 2011 I have a code 18057 and several others,I will post log in next post worked on a freinds daughters car the other day.2000 nb 1.8 turbo Had to drop glove box and get into dash to repair heater fan switch,also did rear rotors and pads.
This is what I used for the AGU (it doesn't have measuring block 032 for the AGU):hope this helps.I've highlighted the blocks I needed to check the lambda. And the value range it should fall into. I'm still new with vagcom and learning. Someone more knowledgeable could also helpBTW, i needed to check the O2 sensor for my MOT because I was getting totally wrong values on the emission test.It was all sorted in the end.(MAF wasn't connected.hehe)But this helped to check the O2 sesnor;; VAG-COM Measuring Block AGU Engine Label file.; Component number 06A 906 018 CG;; Does not work with 06A 906 018 FA (2000 US 2.0L);; Created by James Billings.
Thanks to 'Dave' the VW tech who; got me the codes!;; Visit;1,0,Basic Functions - Spec figures at Idle1,1,Idle speed,800-920 rpm1,2,Engine load,0.5-1.5 m/s1,3,Throttle ang,0-5 deg.1,4,Ignition ang,6-12 BTDC;2,0,Basic Functions - Spec figures at Idle2,1,Idle speed,800-920 rpm2,2,Engine load,0.5-1.5 m/s2,3,Inj. Period,1.00-3.00 m/s2,4,Air mass in,1.8-4 g/s;3,0,Basic Functions -Spec figures at Idle3,1,Idle speed,800-920 rpm3,2,Supply volts,10-14.5V3,3,Coolant temp,80-105 d/C3,4,Intake temp,-45-108.5 d/C;4,0,Idle Stabilisation - Spec figures at Idle4,1,Throttle ang.,0-5 deg.4,2,Idle mass,-1.7-1.7 A/T4,3,Idle mass,0 if man/t4,4,Op. Mode,;5,0,Idle Stabilisation - Spec figures at Idle5,1,Idle speed,800-920 rpm5,2,Spec. Idle,860 rpm5,3,Idle reg,-10-10%5,4,Air mass in,1.8-4 g/s;6,0,Idle Stabilisation - Spec figures at Idle6,1,Idle speed,800-920 rpm6,2,Idle reg,-10-10%6,3,Lambda reg,-10-10%6,4,Ign angle,6-12 BTDC;7,0,Lambda learned values7,1,Lambda reg,-10-10%7,2,Probe volts,0-1V7,3,Valve duty,angle 0-99%7,4,Correction,0.3-1.25;8,0,Lambda learned values8,1,Inj.